Bộ ma trận tín hiệu CYP CH-2603RX

Mã sản phẩm: CH-2603RX
Thương hiệu: Cypress (CYP)

CH-2603RX là HDMI/HDBaseT/USB to HDMI Receiver của Cypress (CYP), thuộc danh mục Matrix; phù hợp triển khai hệ thống nghe nhìn tích hợp chuyên nghiệp.

Giá Liên Hệ

Xuất xứ:: Đài Loan
Bảo hành:: Theo chính sách hãng

Hàng chính hãng, hỗ trợ kỹ thuật và bảo hành theo chính sách nhà sản xuất.

Tính năng và lợi ích

Thông tin được tổng hợp theo cấu hình tham khảo. Vui lòng liên hệ kỹ sư VN TLH để xác nhận cấu hình trước khi đặt hàng.

2×2 matrix switching (both HDMI outputs are independent)
Supported HDBaseT features: HD video and audio, 100BaseT Ethernet, PoH, and control (bi-directional IR/RS-232/USB pass-through)
Balanced analog stereo audio breakout
Flexible USB host selection using front panel buttons
Multiple USB hosts may be connected at once (up to 3 total, between the Tx and a compatible Rx unit) with a single selected host active at a time
Supports providing PoH power from Receiver (PSE) to Transmitter (PD) (compatible Transmitters only)

CH-2603RX — HDMI/HDBaseT/USB to HDMI Receiver.

This HDBaseT 2.0 Receiver is designed for use in environments needing a wide range of flexibility when it comes to inputs, outputs, and control. With a 2 by 2 matrix arrangement of HDBaseT & HDMI inputs and dual HDMI outputs this Receiver can handle a variety of source routing scenarios. The HDMI input and outputs support resolutions up to a maximum of 4K@60Hz (4:4:4, 8-bit) while the HDBaseT input supports resolutions up to a maximum of 4K@60Hz (YUV 4:2:0, 8-bit). A balanced analog stereo audio breakout is also provided (LPCM 2.0 sources only) allowing for professional local powered speakers to be easily added to the system. The HDBaseT input not only supports video and audio but also bi-directional Ethernet, RS-232, USB, and IR.

When paired with this unit’s standard Transmitter, up to 3 switchable USB 2.0 host (Type B) connections are available (2 on the Transmitter, 1 on the Receiver) which connect to 6 USB 2.0 (Type A) device ports (3 on the Transmitter, 3 on the Receiver) for a multi-source, bi- irectional, and highly flexible KVM configuration (Note: Only 1 USB host may be active at a time).

This Receiver (PSE) can provide PoH (Power over HDBaseT) power to the connected HDBaseT Transmitter (PD) (compatible Transmitters only), allowing for greater flexibility within different installation scenarios. This unit is controllable via front-panel controls, WebGUI, Telnet, and RS-232.

Nguồn thông tin kỹ thuật và hình ảnh: trang sản phẩm chính thức của CYP, truy cập ngày 22/10/2026.

Thông số kỹ thuật

Interfaces – Input Port	1 HDMI (Type-A) 1 HDBaseT (RJ-45)
Interfaces – Output Port	2 HDMI (Type-A) 1 Balanced Stereo (5-pin Terminal Block)
Interfaces – Control I/O	1 LAN (RJ-45) 1 RS-232 (3.5mm)
Interfaces – Pass-through Port	1 IR Extender (3.5mm) 1 IR Blaster (3.5mm) 3 USB 2.0 (Type A) 1 USB 2.0 (Type B) 1 RS-232 (3-pin Terminal Block)
Video – HDMI Compliance	HDMI 2.0
Video – HDCP Compliance	HDCP 2.2
Video – Input Signal Types	HDMI 4K@60 8bit YUV 4:4:4 HDMI 4K@60 8bit YUV 4:2:4
Video – Output Signal Type	HDMI 4K@60 8bit YUV 4:4:4
Resolutions – Maximum Input	HDMI; 4096×2160p@60
Resolutions – HDBT	4096×2160p@60 YUV 4:2:0
Resolutions – Maximum Output	HDMI; 4096×2160p@60
Audio – HDMI	LPCM (8 Channels), Bitstream, HD Bitstream
Audio – HDBT	LPCM (8 Channels), Bitstream, HD Bitstream
Audio – Analog Out	1 Vrms S/N Ratio: > 80dB (1kHz with 0dBFS)
Power – Power Supply	24V/3.75A DC
Power – Power Consumption	22.33W
Enclosure – Chassis Material	Metal (Steel)
Enclosure – Chassis Color	Black
Enclosure – Dimensions (W×H×D)	231.5mm×44mm×160mm [Case Only] 231.5mm×44mm×167mm [All Inclusive]
Enclosure – Weight	928g
Field Firmware Update – Interfaces	PC Update, WebGUI
Ordering Information – Model No.	Product Description
Ordering Information – CH-2603RX	HDMI/HDBaseT/USB to HDMI Receiver
Ordering Information – CH-2603TX	HDMI/DP/VGA/USB to HDMI/HDBaseT Transmitter